COS-N Rod Ends

Technical parameter Unit Value
Sliding contact surface Steel / Nylon
Working temperature °C -40 / +120
Type of lubrication High Performance Polymer
Bore Size Range mm 5 – 30

Looking for CHS-N (female) Rod End Sizing?

Rod Ends: COS-N Sizing

Dimensions (mm) Ultimate Radial
Ball Housing Head Length To Part Thread Thread Ball Static Load Tilt
Product Bore Width Width Dia. Ball Center Length Length Size Dia. Capacity Angle Mass
Number d B C D h1 L4 L3 6g dm (kN) α° (g)
COS 5 N 5 8 6 18 33 42 19 M5 11.1 3.6 13 12
COS 6 N 6 9 6.75 20 36 46 21 M6 12.7 5.1 13 18
COS 8 N 8 12 9 24 42 54 25 M8 15.9 9.2 14 33
COS 10 N 10 14 10.5 28 48 62 28 M10 19.1 14.6 13 55
COS 12 N 12 16 12 32 54 70 32 M12 22.2 18.1 13 60
COS 14 N 14 19 13.5 36 60 78 36 M14 25.4 24.0 16 124
COS 16 N 16 21 15 42 66 87 37 M16 28.6 28.4 15 185
COS 18 N 18 23 16.5 46 72 95 41 M18x1.5 31.8 35.8 15 250
COS 20 N 20 25 18 50 78 103 45 M20x1.5 34.9 41.2 14 310
COS 22 N 22 28 20 54 84 111 48 M22x1.5 38.1 50.0 15 400
COS 25 N 25 31 22 60 94 124 55 M24x2 42.9 58.2 15 503
COS 28 N 28 35 24 66 103 136 62 M27x2 47.6 62.9 15 683
COS 30 N 30 37 25 70 110 145 66 M30x2 50.8 76.7 17 770

Speak with a bearing expert before placing an order to verify the part will accommodate the intended application usage.

Part numbers are right-hand thread. Left-hand tread will have an “L” after the “COS” to read “COSL”.