CCTY Bearing | Bearing Blog from CCTY Bearing

26 May Deskside Chat: Holes in Bushings (Video)

Posted at 14:58h in Bearings

Keeping a good film of lubrication between the shaft and press-fit bushing is vital to motion control. In this video, John Sweetwood walks us through the circumference of a bearing and why holes are used in some applications.

24 May Solving Critical Boom Bearing Challenge within 1 Week

Posted at 10:58h in Bushings, Case Study, Cylindrical Roller Bearing

An OEM was experiencing worldwide failure of their telehandler’s boom retraction and was in dire need of a solution. Their current supplier did not have the ability to address the issue in a timely manner, nor did they have a potential solution. The OEM reached out to CCTY Bearing based on a suggestion from one of their suppliers.

16 May Deskside Chats: Universal Joints (Video)

Posted at 10:24h in Square Ball Universal Joint

Bearing manufacturers have a number of skilled engineers on staff - along with people who have been in the industry for decades. One of the great things about having these folks as coworkers is the way that they are able to explain complex concepts.

11 May Lip or Boot: Universal Joint Seal Selection

Posted at 09:46h in Square Ball Universal Joint

Grease is what keeps moving parts in motion. Traditionally, u-joints are outfitted with lip seals to help retain the grease. The lip seal also allows for regreasing and usually acts as a barrier to prevent contaminants like dirt and moisture from getting into the unit.

10 May Get Ready for a Fight: U-Joints vs. Square Ball

Posted at 11:52h in Square Ball Universal Joint

Wondering how the Square Ball Universal Joint compares to traditional ujoints? This side-by-side comparison walks though the differences between the two designs. >>>See the Square Ball Universal Joint in motion.<<<

03 May Fidget Spinners Highlight Ball Bearings

Posted at 15:18h in Ball Bearing

They are a hot seller – if you can find them in stock. Fidget spinners are lauded for improving concentration and reducing stress, along with calming some of the anxiety associated with autism. But what are they?

02 May How does a sway bar differ from a sway link?

Posted at 14:00h in Tie Rods

Sway bars and links are found in ATVs, forklifts, racing cars and family cars – basically any type of vehicle with a suspension.

28 Feb What Reduces Tolerance Stack Up in Ball Joints? (Infographic)

Posted at 09:30h in Ball Joints

Looking for more information about tolerance stack ups in ball joints?

23 Feb Production Part Approval Process (PPAP)

Posted at 16:19h in PPAP

When searching for a potential supplier for critical components, such as a bearings or bushings, it is important to ensure that the supplier is capable of conducting the Production Part Approval Process (PPAP). A supplier that has a proven record of fulfilling the requirements of the PPAP is going to be a more reliable and trustworthy partner.

16 Feb Tolerance Stack Up in Ball Joints

Posted at 13:15h in Ball Joints

Ever try to move a ball joint but it’s too stiff … or too loose? The wide range rotational torque values can be attributed to tolerance stack up.

Blog